You can communicate with the ISS using just a handheld radio with its built in “rubber duck” antenna!

Now that the ISS’s digipeater is active there are several opportunities per day to try out different ways of confirming a radio contact with it.

Yesterday I wanted to see if it’s possible to get a data packet heard by the station 250 miles up with just the “rubber duck” antenna that came equipped with my super low-end 8 watt Baofang BF-F8HP radio (affiliate link).

Normally for satellite communications I use an Arrow Antenna designed specifically for satellite work. But is it possible to use something smaller and more portable? The answer is yes but it’s going to be much more challenging.

I attempted this contact when the station was almost directly over my location for the best results. I attached the radio to my computer with the BTECH-APRS-V01 (affiliate link) cable that converts the radio’s mic and headphone jacks into a three prong TRRS connector for smartphones and laptops with a single headphone/microphone jack on board.

After sending a ton of packets into the air while tracking the station with my smartphone it looks like one of them actually made it according to ARISS.net that listens for packets beamed back down from the station.

I was traveling when I did this so I didn’t have my Windows computer with me. I used an iOS app called PulseModem running on my Mac in its iOS compatibility mode. It was having trouble triggering the radio’s VOX so I probably sent less packets than I thought I did. I ended up holding down the PTT button on the radio and pushing transmit on the computer’s screen.

I’m looking forward to seeing how this works with a more reliable set up on future passes!