Beelink recently sent me their ME Pro device, a personal server that essentially functions as a mini PC with expanded storage capabilities. It looks pretty cool too.
Check it out in my latest video review!
The unit I evaluated is the entry-level model featuring an Intel N95 processor. An alternative version with an Intel N150 processor is also available, offering slight improvements in power efficiency and an increase in soldered RAM from 12 gigabytes to 16 gigabytes. Both models operate with a 25-watt thermal design power and are fully capable of managing standard personal server tasks. You can find them on Amazon here (compensated affiliate link).
The internal layout allows for measurable storage expansion. The bottom of the device accommodates up to three NVMe drives, supporting a total of 12 terabytes of solid-state storage. A separate rear panel provides access to bays for two 3.5-inch desktop hard drives. This storage setup is not designed for hot-swapping; all drives and panels must be secured with screws. Beelink includes an Allen wrench for this purpose, though I found its small size makes it somewhat difficult to use effectively. The device is designed for internal maintenance access, allowing the entire motherboard to be removed for cleaning by loosening four screws.
For networking and peripheral connectivity, the ME Pro includes a 10-gigabit-per-second USB-A port on the front and a similarly rated USB-C port on the rear, alongside an HDMI output. The device supports dual 4K display output at 60 frames per second.
Network connections are handled by a 5-gigabit-per-second Ethernet port using a Realtek controller and a secondary 2.5-gigabit port utilizing an Intel controller. When I tested the 5-gigabit connection, it yielded disk writes between 400 and 500 megabytes per second to the solid-state drives, which aligns with expected network overhead limits.
Operating as a media server via Unraid, the hardware demonstrated clear capability with common server loads. When running Plex, the N95 processor managed hardware transcoding of a 4K HDR video file to 720p with low CPU and bandwidth utilization. It also successfully handled HEVC codec transcoding. During these tasks, with two mechanical desktop drives spinning, power consumption measured approximately 33 watts, peaking near 70 watts under maximum load.
Thermal performance remained stable, with the NVMe drives showing only a minor six to seven-degree Celsius temperature increase under sustained load. Both the fans and the drives operate at a low volume. It’s a very quiet device even with running spinning drives.
There are a few hardware design choices that warrant observation. The system relies on a 100-watt wall-wart power supply, which is susceptible to accidental disconnection from standard outlets. Additionally, while the unit was shipped with a version of Windows, the necessary drivers were not pre-installed, preventing the operating system from functioning correctly out of the box. This positions the device more as a platform for user-supplied NAS operating systems, such as Unraid or Linux distributions, rather than a turnkey Windows machine.
Furthermore, for a device categorized as a “Pro” model utilizing an OS like Unraid—where one drive is typically dedicated to parity—expanding the SATA drive capacity from two bays to four would provide a more practical parity-to-storage ratio. The current configuration requires careful planning for anyone looking to maximize their redundant storage capacity on this compact platform.
Disclosure: The ME Pro NAS was provided free of charge. However, they did not review or approve this content prior to publication.